Total
Aquaphor WaterBoss 400 - universal device which includes motor self-cleaning filter, water softeners and iron removers. Softeners and iron removal system Aquaphor WaterBoss 400 now is the most compact and most efficient system on the market between water purifiers, for chalets and flats. Usually, water treatment systems need to book a place, at the design stage. And if for some reason, this has not happened, install water purification systems in the finished project is quite problematic. WaterBoss 400 is compact, with a unique, modern design and high operational specifications, it makes it possible to use Aquaphor Waterboss 400 even there where special space was not intended.
Another indicator - relatively small water consumption for recovery - a very important moment for those, with the local sewerage and water meters. Softeners and iron removal system Aquaphor WaterBoss is a simple and convenient service, and outperforms conventional water softeners in all major categories. Once set, the system requires only periodic salt hatch.
Technical characteristics:
Aquaphor WaterBoss 400 effectively purify the water of iron and manganese to 3 mg / l and a hardness of up to 15 mg-eq / l.
Working capacity / max, m3 / h 1.5 / 2.4
Salt per regeneration from 0.5 to 1.4 kg
Recovery duration 12-18 min
Water consumption per regeneration 36-50l
Connection size 3/4 "
Variable flow valve 1 "
Salt accumulation of 14 kg
Sorbent quantity of 11 l
Electrical characteristics:
12VAC, 1 phase 50Hz
Maximum water temperature 48 ° С
Water pressure (min - max atm) from 1.4 to 8
Dimensions: 29 x 47 cm, Height 55 cm, Weight 25 kg
A two-part filtration capacity. It includes self-cleaning sandy prefilter 20 mik. and filter, which removes iron, manganese, and hardness. Does not require filter replacement. Provides maximum efficiency of water purification from dissolved iron, manganese and hardness. Can significantly reduce the amount of salt and water during regeneration. Patented flow distributor. It ensures the flow of water through the entire content of the sorbent, it prevents formation of the non-working area. For user comfortable controller, it is safe, quiet, and fully automatic. Durable plastic case.
Ion exchange resins: WaterBoss softeners use ion exchange resin pellets with a diameter of 0.2 mm. Narrow fractional composition with a small sized pellets allows to obtain sorption (Ion exchange) environment with very low hydrodynamic resistance and very high kinetic ion exchange reaction.
Another indicator - relatively small water consumption for recovery - a very important moment for those, with the local sewerage and water meters. Softeners and iron removal system Aquaphor WaterBoss is a simple and convenient service, and outperforms conventional water softeners in all major categories. Once set, the system requires only periodic salt hatch.
Technical characteristics:
Aquaphor WaterBoss 400 effectively purify the water of iron and manganese to 3 mg / l and a hardness of up to 15 mg-eq / l.
Working capacity / max, m3 / h 1.5 / 2.4
Salt per regeneration from 0.5 to 1.4 kg
Recovery duration 12-18 min
Water consumption per regeneration 36-50l
Connection size 3/4 "
Variable flow valve 1 "
Salt accumulation of 14 kg
Sorbent quantity of 11 l
Electrical characteristics:
12VAC, 1 phase 50Hz
Maximum water temperature 48 ° С
Water pressure (min - max atm) from 1.4 to 8
Dimensions: 29 x 47 cm, Height 55 cm, Weight 25 kg
A two-part filtration capacity. It includes self-cleaning sandy prefilter 20 mik. and filter, which removes iron, manganese, and hardness. Does not require filter replacement. Provides maximum efficiency of water purification from dissolved iron, manganese and hardness. Can significantly reduce the amount of salt and water during regeneration. Patented flow distributor. It ensures the flow of water through the entire content of the sorbent, it prevents formation of the non-working area. For user comfortable controller, it is safe, quiet, and fully automatic. Durable plastic case.
Ion exchange resins: WaterBoss softeners use ion exchange resin pellets with a diameter of 0.2 mm. Narrow fractional composition with a small sized pellets allows to obtain sorption (Ion exchange) environment with very low hydrodynamic resistance and very high kinetic ion exchange reaction.
