Total
The technology of a two-layer carbon block is used. Contains AQUALEN.
Increased sorbent content AQUAFOR Filter
AQUAFOR Viking is a modern sorption water purifier that can purify ALL water in the apartment from residual active chlorine, organic substances, heavy metal ions, rust and unpleasant odors.
The AQUAFOR Viking water purifier uses two-stage modules from two coaxially located carbon blocks.
The outer layer of the filter module with a pore size of 20 μm is made of a mixture of granules of activated carbon and ion exchange fiber AQUALEN and is characterized by increased dirt capacity compared to any other world analogues.
The inner layer of the module is an ultra-dense carbon block with a porosity of 1 μm, which delays even microimpurities.
AQUAFOR Viking water treatment systems can be used not only in city apartments and country cottages, but also in kindergartens, schools, cafes and in any place where you need to get a lot of really clean water.
Specifications:
• Dimensions: 60.0 x 18.0 x 18.0 cm
• The connecting sizes of the case: 3/4 "
• When installing the replaceable B150 PLUS module:
• Productivity: 10 l / min
• Resource: 40 000 l
When installing replaceable water pre-treatment modules B520-13
(for cold water) and B520-14 (for hot water):
• Productivity: 25 l / min
• Resource: 100,000 liters.
This means that you and your loved ones will not only drink clean water, but also wash yourself with truly clean water.
The advantages of the AQUAFOR Viking system are high performance, long life and excellent quality of water treatment.
Viking protects not only plumbing, but also your health.
AQUAFOR Viking is the only one of the main filters that traps not only rust and sand, but also chlorine, organic matter and other dissolved impurities.
The compactness of the Mini and Midi models allows you to install them even in conditions of space deficit, which makes them ideal for a small apartment.
Thanks to the original fastening of the housing to the wall and quick-disconnect connection (“American”), it is convenient to replace the module even when the filter is installed in a hard-to-reach place.
Cases of the AQUAFOR Viking system are available in three sizes and, depending on the module installed inside, the resulting system can perform various tasks of water purification, have a different resource and performance.
Increased sorbent content AQUAFOR Filter
AQUAFOR Viking is a modern sorption water purifier that can purify ALL water in the apartment from residual active chlorine, organic substances, heavy metal ions, rust and unpleasant odors.
The AQUAFOR Viking water purifier uses two-stage modules from two coaxially located carbon blocks.
The outer layer of the filter module with a pore size of 20 μm is made of a mixture of granules of activated carbon and ion exchange fiber AQUALEN and is characterized by increased dirt capacity compared to any other world analogues.
The inner layer of the module is an ultra-dense carbon block with a porosity of 1 μm, which delays even microimpurities.
AQUAFOR Viking water treatment systems can be used not only in city apartments and country cottages, but also in kindergartens, schools, cafes and in any place where you need to get a lot of really clean water.
Specifications:
• Dimensions: 60.0 x 18.0 x 18.0 cm
• The connecting sizes of the case: 3/4 "
• When installing the replaceable B150 PLUS module:
• Productivity: 10 l / min
• Resource: 40 000 l
When installing replaceable water pre-treatment modules B520-13
(for cold water) and B520-14 (for hot water):
• Productivity: 25 l / min
• Resource: 100,000 liters.
This means that you and your loved ones will not only drink clean water, but also wash yourself with truly clean water.
The advantages of the AQUAFOR Viking system are high performance, long life and excellent quality of water treatment.
Viking protects not only plumbing, but also your health.
AQUAFOR Viking is the only one of the main filters that traps not only rust and sand, but also chlorine, organic matter and other dissolved impurities.
The compactness of the Mini and Midi models allows you to install them even in conditions of space deficit, which makes them ideal for a small apartment.
Thanks to the original fastening of the housing to the wall and quick-disconnect connection (“American”), it is convenient to replace the module even when the filter is installed in a hard-to-reach place.
Cases of the AQUAFOR Viking system are available in three sizes and, depending on the module installed inside, the resulting system can perform various tasks of water purification, have a different resource and performance.
