GEYSER Allegro

Overall dimensions of the water purifier housing assembly, not more than, mm. 470x430x420
Water temperature no more than 40 ° С
Productivity up to 200 l / day
Working pressure is from 3 atm.
The volume of the storage tank is 12 l. (the volume of water in the storage tank is 40-70% of its volume, depending on the pressure in the inlet water supply).

Service life 10 years
Description ...

143.90 €
Compare products
The reverse osmosis technology used in the Geyser Allegro filter consists in filtering water through a semi-permeable membrane. The pore sizes of the membrane are so small that only water molecules pass. The size of the molecules of most impurities, as well as bacteria and viruses, is significantly larger than water molecules, so they do not pass through the membrane. The system operates at a pressure in the supply line of at least 3 atm.
  • The maximum volume of purified water is 7.5 l.;
  • A special valve for discharging water into the drain when the pressure in the tank is higher than 4 atm .;
  • Double flask sealing;
  • Withstands pressure up to 25 atm., At least 100,000 cycles of water hammer. 
  • Everything you need to connect in the kit.
STEPS OF WATER CLEANING BY THE REVERSE OSMOSIS SYSTEM GEYSER ALLEGRO:
  • Pre-treatment (water treatment to increase the life of the membrane): sedimentary cartridges PP 5 - 10SL - remove insoluble particles up to 5 microns in size (rust, suspension) - 2 pcs .;
  • CBC 10 - 10SL is a carbon block made of high quality coconut activated carbon with a porosity of 10 μm. - 1 PC. Resource 6 - 12 months depending on water quality.
  • Reverse osmosis membrane 1812-50 GPD - removal of all impurities, including bacteria and viruses. Resource 1 - 3 years (depending on water quality).
  • Carbon post-filter (activated carbon) - improves the taste of water. The resource is 12 months.