CLACK WS1.25 SF 1465 Water Softener (softening, iron remover)

Structurally, the softener CLACK WS1 SF 1645 is made in the form of a cylindrical column with an automatic control valve on top.
Inside the column is a lifting pipe with distribution grids, filled up to 60% of its height with filter media.
Description ...

1399.00 €
Compare products
The softener for removal of hardness of water, gathers from the standardized accessories. The difference with other companies can only be in the manufacturer of components and their quality.
The Clack control valve for water softening is adjusted once when the system is installed according to the calculated water analysis data. All installed settings are saved when the valve is turned off. Thus, even with a power outage, the softener will work and remove hardness.
 
The marking of the SF water softening plant is formed as follows:
  • S - means SOFTENER (softenin);
  • F - denotes filter (filter);
  • from  48 — the first two digits are the diameter of the filter housing in inches (1 inch = 2.6 cm);
  • from 44 to 72 - the second two numbers indicate the height of the filter in inches;
  • And (if any) - indicates that the installation of a continuous softening (two filters);
Technical specifications:
  • Model - Water softening plant -1645;
  • Productivity - 2.5-3.0 m3 / h;
  • Dimensions (height / diameter) - 1875/370 mm;
  • The size of the tank for salt (height / diameter) - 1020/530 mm;
  • The volume of cation exchanger - 100 liters.