CLACK WS1 SF 1054 Water Softener (softening, iron remover)

Structurally, the softener CLACK WS1 SF 1054 is made in the form of a cylindrical column with an automatic control valve on top.
Inside the column is a lifting pipe with distribution grids, filled up to 60% of its height with filter media.
Description ...

799.00 €

Compare products

The softener for removal of hardness of water, gathers from the standardized accessories. The difference with other companies can only be in the manufacturer of components and their quality.

The Clack control valve for water softening is adjusted once when the system is installed according to the calculated water analysis data. All installed settings are saved when the valve is turned off. Thus, even with a power outage, the softener will work and remove hardness.

Cleaning technology: ion-exchange water softening - water passes through a special filtering material - cationite, which attracts hardness ions from water and replaces them with harmless sodium ions.

Filtering material: cation exchange resin Purolite C100, DOWEX.

Regeneration: restoration of the working properties of the filtering material is carried out automatically using pressed (tablet) salt and water compressed into tablets. The salt solution is passed through the filtering material, and the removed contaminants are washed down the drain.

The marking of the SF water softening plant is formed as follows:

S - means SOFTENER (softening)
F - denotes filter (filter)
from 08 to 48 — the first two digits are the diameter of the filter housing in inches (1 inch = 2.6 cm);
from 44 to 72 - the second two numbers indicate the height of the filter in inches;
And (if any) - indicates that the installation of a continuous softening (two filters);

Technical specifications: