Total
"Iron Out" rust stain remover 6 pcs. (box)
Super Iron Out is multipurpose rust stain remover and water softener cleaner.
It is very effective to clean ion exchange resins in water softeners to eliminate iron build-up. To ensure long-term operation for softeners, use it regularly at every maintenance. It is also effective to clean filter and softener control valves channels and inner parts like injectors.
Description ...
It is very effective to clean ion exchange resins in water softeners to eliminate iron build-up. To ensure long-term operation for softeners, use it regularly at every maintenance. It is also effective to clean filter and softener control valves channels and inner parts like injectors.
Description ...
93.00 €
Compare products
Restores the effectiveness of ion-exchange resins by removing glandular deposits formed in water softeners. Also removes glandular stains and rust with:
♦ surfaces in the bathroom;
♦ clothes and various types of fabrics;
♦ dishes;
♦ automatic dishwashers and washing machines;
♦ wall;
♦ Cars.
Iron Out Exploitation
Automatic softeners
- Add about 100 g Iron Out per 1 liter of warm water, mix thoroughly.
- Set the salt use controller (if equipped) to the highest position.
- Pour Iron Out solution into the salt tank. For ventilation, leave the salt tank lid open.
- Set the softener to regenerate overnight. In the morning, close the salt tank cover and reinstall the salt sensor.
Apply Iron Out to a damp surface and wipe with a sponge or damp cloth. Rinse thoroughly after stain removal.
► For the toilet - apply 2 tablespoons of Iron Out while stirring the water and leave for half an hour. Repeat the procedure if necessary.
► In order to remove iron stains from the fabric, it is necessary to soak the fabric in a solute of 1/4 of a cup of Iron Out in 8 liters of warm water for half an hour. Then rinse the solute from the cloth.
► For dishes - for 20 minutes, place the dishes in a solute of 2 tablespoons of Iron Out in 4 liters of water. Wash the solution from the dishes.
► For dishwashers and washing machines - empty the machine from the dishes (laundry), add 10 tablespoons of Iron Out and start the machine for one full cycle.
► Exterior surfaces - concrete, plaster, brick, vinyl, as well as metal surfaces can be cleaned with a solute of 100 g Iron Out per 1 liter of water.
Apply the solute on the affected surface and leave for one hour. Repeat the procedure if necessary. Rinse thoroughly.
Safety precautions: Avoid inhalation of solute fumes, as well as contact with eyes and skin. In case of contact with skin, wash with water. If the solute gets into your eyes, consult a doctor. If swallowed, flush the stomach and call an ambulance.
♦ surfaces in the bathroom;
♦ clothes and various types of fabrics;
♦ dishes;
♦ automatic dishwashers and washing machines;
♦ wall;
♦ Cars.
Iron Out Exploitation
Automatic softeners
- Add about 100 g Iron Out per 1 liter of warm water, mix thoroughly.
- Set the salt use controller (if equipped) to the highest position.
- Pour Iron Out solution into the salt tank. For ventilation, leave the salt tank lid open.
- Set the softener to regenerate overnight. In the morning, close the salt tank cover and reinstall the salt sensor.
Other uses of Iron Out
► Plumbing and ceramic products.Apply Iron Out to a damp surface and wipe with a sponge or damp cloth. Rinse thoroughly after stain removal.
► For the toilet - apply 2 tablespoons of Iron Out while stirring the water and leave for half an hour. Repeat the procedure if necessary.
► In order to remove iron stains from the fabric, it is necessary to soak the fabric in a solute of 1/4 of a cup of Iron Out in 8 liters of warm water for half an hour. Then rinse the solute from the cloth.
► For dishes - for 20 minutes, place the dishes in a solute of 2 tablespoons of Iron Out in 4 liters of water. Wash the solution from the dishes.
► For dishwashers and washing machines - empty the machine from the dishes (laundry), add 10 tablespoons of Iron Out and start the machine for one full cycle.
► Exterior surfaces - concrete, plaster, brick, vinyl, as well as metal surfaces can be cleaned with a solute of 100 g Iron Out per 1 liter of water.
Apply the solute on the affected surface and leave for one hour. Repeat the procedure if necessary. Rinse thoroughly.
Safety precautions: Avoid inhalation of solute fumes, as well as contact with eyes and skin. In case of contact with skin, wash with water. If the solute gets into your eyes, consult a doctor. If swallowed, flush the stomach and call an ambulance.
