Aquaphor WaterBoss Pro 180 Water softener and iron remover

Perforamce up to 3 m3/h
Volume of water on regeneration 58 l
Quantity of salt on regeneration 0,9 kg
Time on regeneration 30 min
Dimensions 380 х 480 х 650 mm
Description ...

Price by request
Compare products
Aquaphor Pro 180 – is a multipurpose water purification equipment for a private house or an apartment, which consists of mechanical self-cleaning filter,iron remover and water softner. Due to technical features of the system,Aquaphor Pro 180 outstands the usual water softners by all basic features.
 ► Doesn't require the replacement of the module
 ► Equipped with an overflow protection system
 ►
 
Effective auto-regeneration
 ► New generation automation 

 
waterboss pro180 преимущества очистки воды
1. Two-sectioned filtring capacity unites in one ,self-cleaning filter and softening sorbent. 
2. A built in self-cleaning filter - Aquaphor Pro 180 doesn't require the module replacement.
3.
The compacted layer of softening sorbent provides a maximum efficiency in water purification from hardness salts, iron and manganese ions.
4. Patented flow distributor  provides the flow of the water throughout the WHOLE sorbent layer, which excludes the formatyion of  stagnant zones. Allows to reduce the neccessary volume of the sorbent and salt on regeneration.
5. Comfortable in use controller-
set the hardness and time parameters, the rest the controller will do by itself.
6. The safety valve prevents the possibility of an overflo.
7. The control valve is silent and fully automative.
8. Reliable plastic frame (housing) contains in itself the frame of a filter and a salt tank(capacity).
waterboss pro180 умягчитель для дома
 
The ion-exchange resin in softners Aquaphor Pro 180 a monodisperse ion exchange resin with a granule diameter of about 0.2 mm is used. The "narrow" fractional composition in combination with the small size of the granules makes it possible to obtain a sorption (ion-exchange) medium with a very low hydrodynamic resistance and high kinetics of the ion-exchange reaction. The ion-exchange resin in Aquaphor Pro 180 is tightly packed between the two polymer meshes with the size of a slot of 20 mcm and area, close to the column diameter. Due to this,  there are no parasitic stagnant volumes of resin that are not involved in the operation of the softener. Efficiency of regeneration In Aquaphor WaterBoss Pro systems, countercurrent regeneration "in a preloaded layer" is implemented, which is impossible with free filling of resin due to the floating effect. This provides a significant - up to 70% - salt saving during the regeneration.
 
колонна vs waterboss  

Technical Characteristics:
• Height: 64,8 cm
• Area of the base: 38 х 48 cm Max.
• Compensated hardness: 24 mgeq/l
• Max.
accumulated hardness
: 23377 mgeq
• Water Pressure(min - max, atm): 1,4 - 8,3
• Max. water temperature: 49 °С
• Possible salt reserve: 55 кг
Electrical characteristics: 12 VAC, 1 phase 50 Hz