Waterboss 5100Q KDF 55 - Water Softener and Iron remover (sulfide)

Universal water purification system for a private house or apartment, including a mechanical self-cleaning filter, iron remover and water softener WaterBoss 5100Q KDF 55
Description ...

1230.00 €
Compare products

Waterboss 5100Q KDF 55 - Water Softener and Iron remover (sulfide)

The system is designed for complex water purification from iron ions, manganese and hardness salts and hydrogen sulfide. They are installed as the main filter, or as part of a water treatment system in private homes, factories, restaurants, cafes, etc. They are made in a compact "cabinet" type housing that combines the functions of a filter housing and a salt dissolving tank, contains a finely dispersed sorbent of increased capacity, which ensures high performance and complete extraction of impurities, especially iron and manganese and hydrogen sulfide.

Counter-current regeneration in a compressed layer ensures the most effective recovery of the sorbent from accumulated contaminants. The patented mesh flow distributor evenly distributes the flow of purified water throughout the entire volume of the sorbent.

This filter model is equipped with a deeply redesigned flow switching valve unit, which is responsible for the correct regeneration of the filter and its reliable operation throughout its entire service life.

– The service life of the systems is 10 years (if preventive work was done on time). During operation, the owner of the system is only required to add salt, which is a consumable for regeneration cycles.

– Equipped with additional filter medium KDF85 (USA) works on hydrogen sulfide (sulfides).
– Simultaneous removal of dissolved iron, manganese and hardness salts and hydrogen sulfide.
– Reliable stainless steel connections and drainage hose included.
– Reliable and durable operation in the entire pressure range from 1.5 to 7 atm.
– Counter-current regeneration in a compressed layer effectively restores the filter
from accumulated contaminants.
– Economical use of salt and water.
– Removal of iron and manganese of high concentration of hydrogen sulfide.
– New valve of improved design.

Filter construction

1. Compact cabinet-type housing.
2. Fine-dispersed sorbent of increased capacity provides high performance and complete removal of iron, manganese and hardness.
3. Patented valve of our own design ensures uninterrupted operation of the filter throughout its entire service life.
4. Controller with a large information screen.
5. Patented mesh flow distributor evenly distributes the flow of purified water throughout the entire volume of the sorbent, equipped with KDF85 made in the USA.
6. Slider lid for easy access to the salt tank and ensuring the compactness of the filter.
7. Bypass valve as standard.
8. Ultra-reliable tank made of durable glass-filled plastic.
Emergency valve prevents overflow.
The control valve is silent, fully automatic.



Requirements for source water in the Waterboss system:

1) Hardness - no more than 31 mg eq/l
2) Content of divalent iron - no more than 10 mg/l
3) Content of trivalent iron - no more than 0.5 mg/l
4) pH - from 6 to 8
5) Content of petroleum products - no more than 1 mg/l


The Waterboss softener does not clean water, bacterial contamination, oil products, organic substances. If the water contains these impurities, additional equipment must be installed.

Characteristic

Model WaterBoss 5100Q

Total maximum compensated hardness (Fe+Mn+Ca), mgeq/l

31

Maximum content of iron and manganese ions in water

10 mg/l

Minimum pH

6

Type of backfill and its quantity

Power Clean Filter Media Super Fine Resin - 28.8L

Salt consumption, kg / Resin capacity, mg-eq (HC - high capacity)

3-4

Salt consumption, kg / Resin capacity, mg-eq (NE - high efficiency)

5

Working water temperature

5 - 49°С

Working productivity

2.8 m3/h

Size of filtration tank, cm

26,7 х 53,4

Maximum performance/pressure drop, atm.

3,6 m3/h /1,03

Pressure drop at flow rate of 0.91 m3/h

0,28

Maximum drainage flow during regeneration (backwash, m3/h)

0,5

Water pressure (avg. min/max), atm.

2 -  8

Minimum required water flow, atm.

1,5

Maximum chlorine content, mg/l

1

Processor type

5-button

Regeneration time, minutes (HC - high capacity)

48

Regeneration time, minutes (HE - high efficiency)

38

Water consumption for regeneration (HC - high capacity)

70-90

Water consumption for regeneration, liters (NE - high efficiency)

120

Regeneration frequency, days

Over the counter

By counter at a set time

Stock of salt

55 kg

Height, cm

75.5

Base, cm
 

36,5 х 46,6
 

Electrical power supply

220/12 VAC, 1 phase, 50Hz

Connection dimensions

¾" NMPT

Gross weight, kg

48


Equipment

1. Assembled softener – 1 piece;
2. Overflow nipple – 1 piece;
3. Drainage tube D=16 mm. (5/8”), L=2.5 m. – 1 piece;
4. Power supply 12VAC – 1 piece;
5. Microcontroller – 1 piece;
6. Drain pipe 1/2″ – 1 piece.

 
  • Made in USA
  • 2 year warranty​

Buy WaterBoss

You can buy WaterBoss 
5100Q in our store akvafors.lv

If you found WaterBoss cheaper, fill out the form Found cheaper? and we will give you an additional discount.

 

In our store you can also buy:

Reverse Osmosis
Main Line Filters
Cartridges for Filters