Organic coagulants NALCO 71225

Recommended for raw water treatment, primary and secondary wastewater treatment and filtration.
Introduces fewer solutes to clarified water than traditional treatment methods.
Minimally affects the pH and alkalinity of the treated water.
Effective over a wide pH range.
Effectively removes organic color.
Effective at low temperatures.

Using
ULTRION 71225 is also used for wastewater treatment in primary and secondary clarifiers and flotators.
ULTRION 71225 is used in raw water treatment and filtration systems.

Dosage
Your Nalko representative will recommend the optimal dosage needed to ensure the program is as effective as possible for your specific system conditions.
The dosage required is highly dependent on the application and system conditions.
ULTRION 71225 is readily soluble in water and can be dosed neat or as a solution prepared with an in-line static mixer.

Innings
ULTRION 71225 must be dispensed through a closed dosing system.
A closed dispensing system is defined as a system in which a product is transferred from a closed storage vessel to treated water without being exposed to the atmosphere, except in the case of normal ventilation or pressure relief.
The ULTRION 71225 should be fed with a quick mix and will be distributed throughout the system.

Materials
Storage and application equipment (pumps and lines) must be made of PVC, polyethylene or Teflon.
Do not use aluminum, brass, carbon steel or stainless steel in contact with clean product.

Appeal
Personal protective equipment such as goggles and rubber gloves is recommended as a standard precaution.
Use the MSDS as the only official source of safety and environmental information.
Protect from freezing and high temperatures.
High storage temperatures can reduce the shelf life of the product.

Notes
ULTRION 71225 is available in PORTA-FEED non-returnable containers and containers in various sizes.