"Clack" control valve WS1.5 EI Regenerating - Time (Softener KMnO)
Filters for water in the house.
Full automatic with water meter. Kit for softener or complex filter.
Description ...
Full automatic with water meter. Kit for softener or complex filter.
Description ...
970.00 €
Compare products
Clack WS 1.5 "EI control valve - automatic equipment for filters with 1.5" connection diameter. Diameter under a water pipe - 2 ". Landing thread - 4". It is delivered in two modifications: DM - reagent, BTZ - reagent-free. Reagent valve Clack WS 1.5 "EI (V15EI-DM) has a 1/2" reagent line for connecting a salt-solvent tank, and is equipped with a meter for accounting for purified water. Possible upward and downward flow of the reagent during washing. The Clack WS 1.5 "EI (V15EI-BTZ) reagent-free valve is a three-cycle (default), and is used on de-ironers, clarifiers, and collection filters. This valve is equipped with a five-button (staggered) CI card with the maximum number of settings. It is possible to immediately rinse , with the transition to the next stage of regeneration.The board has connectors for connecting the meter, MAV and NHWB valves, as well as relay outputs.
Manufacturer: Clack Corporation
Model: Clack WS 1.5 EI
Body Material: Lead Free Brass / Bronze
Diameter for connection (input / output), inch: 1.5 / 1.5 Female NPT
Drain Diameter, inch: 1.25 ”Female NPT with, 3/4” Male NPT Standard, 1 ”Male NPT Optional
Water Pipe Diameter, Inch: 1.90 ”O.D.Pipe, 1.5” NPS
Diameter of a landing thread, inch: 4 "
Nominal water consumption, m3 / h: 15.8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: EI (Electronic, up to 6 stages of regeneration)
Type of memory: Non-volatile (EEROM, electrically erasable read-only programmable memory)
Reagent resistance: Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Housing height from the top of the filter housing, mm: 191
Range of the applied cases, inch: 12-30 - softening
12-30 - filtration
Power supply characteristics, V / Hz: 220/50
Operating temperature, degrees Celsius: 4-43
Working pressure, bar: 1.4-8.27
Weight of control valve, kg: 21 lbs (9.3 kg)
Manufacturer: Clack Corporation
Model: Clack WS 1.5 EI
Body Material: Lead Free Brass / Bronze
Diameter for connection (input / output), inch: 1.5 / 1.5 Female NPT
Drain Diameter, inch: 1.25 ”Female NPT with, 3/4” Male NPT Standard, 1 ”Male NPT Optional
Water Pipe Diameter, Inch: 1.90 ”O.D.Pipe, 1.5” NPS
Diameter of a landing thread, inch: 4 "
Nominal water consumption, m3 / h: 15.8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: EI (Electronic, up to 6 stages of regeneration)
Type of memory: Non-volatile (EEROM, electrically erasable read-only programmable memory)
Reagent resistance: Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Housing height from the top of the filter housing, mm: 191
Range of the applied cases, inch: 12-30 - softening
12-30 - filtration
Power supply characteristics, V / Hz: 220/50
Operating temperature, degrees Celsius: 4-43
Working pressure, bar: 1.4-8.27
Weight of control valve, kg: 21 lbs (9.3 kg)