"Clack" control valve WS1.5 EI Regenerating - Meter (Softener KMnO)

Filters for water in the house.
Full automatic with water meter. Kit for softener or complex filter.
Description ...

1299.00 €
Compare products
Clack WS 1.5 "EI control valve - automatic equipment for filters with 1.5" connection diameter. Diameter under a water pipe - 2 ". Landing thread - 4". It is delivered in two modifications: DM - reagent, BTZ - reagent-free. Reagent valve Clack WS 1.5 "EI (V15EI-DM) has a 1/2" reagent line for connecting a salt-solvent tank, and is equipped with a meter for accounting for purified water. Possible upward and downward flow of the reagent during washing. The Clack WS 1.5 "EI (V15EI-BTZ) reagent-free valve is a three-cycle (default), and is used on de-ironers, clarifiers, and collection filters. This valve is equipped with a five-button (staggered) CI card with the maximum number of settings. It is possible to immediately rinse , with the transition to the next stage of regeneration.The board has connectors for connecting the meter, MAV and NHWB valves, as well as relay outputs.

Manufacturer: Clack Corporation
Model: Clack WS 1.5 EI
Body Material: Lead Free Brass / Bronze
Diameter for connection (input / output), inch: 1.5 / 1.5 Female NPT
Drain Diameter, inch: 1.25 ”Female NPT with, 3/4” Male NPT Standard, 1 ”Male NPT Optional
Water Pipe Diameter, Inch: 1.90 ”O.D.Pipe, 1.5” NPS
Diameter of a landing thread, inch: 4 "
Nominal water consumption, m3 / h: 15.8 (70 gpm - 263 l / min)
Regeneration Type: Downstream / Upstream
Controller: EI (Electronic, up to 6 stages of regeneration)
Type of memory: Non-volatile (EEROM, electrically erasable read-only programmable memory)
Reagent resistance: Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Housing height from the top of the filter housing, mm: 191
Range of the applied cases, inch: 12-30 - softening
12-30 - filtration
Power supply characteristics, V / Hz: 220/50
Operating temperature, degrees Celsius: 4-43
Working pressure, bar: 1.4-8.27
Weight of control valve, kg: 21 lbs (9.3 kg)