HIDROTEK Industrial RO membrane LP-4040
Reverse Osmosis membrane for industrial use
With stable quality, salt rejection rate and high flow rate
Has been rolling membranes since 2009, rich experience, reliable factory
Size: 4”*40” (4040)
Recommended operation pressure: 100 psi
Description ...
With stable quality, salt rejection rate and high flow rate
Has been rolling membranes since 2009, rich experience, reliable factory
Size: 4”*40” (4040)
Recommended operation pressure: 100 psi
Description ...
199.99 €
Compare products
LP - industrial ultra low pressure reverse osmosis membrane element can achieve the same high water output and high desalination rate as ordinary low pressure membrane with extremely low working pressure, saving energy. it is widely used in: surface water, groundwater and some low-pollution urban landscape and agricultural irrigation, drinking water, municipal water supply, sewage, commercial water treatment plant, hospital, laboratory water treatment plant, civil water treatment, etc.
(1).png)
Test conditions:
Test pressure …………………………….110psi
Test solution temperature……………………25 ℃
Test solution concentration ..................... ........1000ppm
pH value of the test solution……………………7.5
Recovery rate………………………………15%
Limitations and operating conditions:
Maximum working pressure……………………600psi
Maximum Supply Water Flow…………….75 gpm (8040) / 16 gpm (4040/4021)
Max. SDI inlet……………………………… .5
Maximum pressure drop…………………15 psi
Residual chlorine……………………………………<0.1 ppm
Feed water pH range……………………3.0-10.0