Ecosoft Cross90 reverse osmosis filter

CROSS 90 is a stylish and smart water filter that efficiently purifies up to 90 liters of water per hour, delivering it directly from your tap. With intelligent colored light alerts that monitor both filter status and water quality, you can always trust the purity of your water. Its sleek design adds a touch of sophistication to your kitchen. Reduces PFAS content by up to 99%.
Description ...

484.99 €
Compare products
Key features
  • Direct flow RO – 1.5 liters per minute
  • Smart flushing – built-in automatic flushing program
  • Smart indication for filter lifetime and water quality reminder
  • DIY filter replacement – no need to cut off the water source during replacement
  • Recovery rate >50% – efficient water saving
  • Slim design – saves more space under the sink

 How it works

CROSS 90 filter uses a three-stage water purification system that effectively removes impurities, including bacteria, viruses, and harmful chemicals. The main filtration stages are described below: 

Composite polypropylene and carbon block filter 

In the first stage, water passes through a filter that traps sediment such as sand and rust, while also reducing chlorine content, organic compounds, and petrochemicals. This provides basic water purification and prepares it for the next stages. 

Reverse osmosis membrane (600 GPD) 

In the second stage, water undergoes molecular purification through a reverse osmosis membrane, which removes up to 99.8% of impurities, including bacteria and viruses. This process ensures the highest level of water purity. 

Carbon post-filter 

The final stage involves passing water through an activated carbon post-filter, which improves the taste and odor of the water, providing final purification before consumption. 

Stages of filtration

Smart indication and features of CROSS 90 filter 

Indication of replacement filters condition 

CROSS 90 filter system is equipped with a smart color-coded indicator on both the faucet and the front panel. This feature serves as a convenient reminder to change the replacement filters. 

  • Green light: Indicates that the filter's capacity is sufficient. 
  • Purple light: Signals that the filter's capacity is running low, prompting preparation for replacement. 
  • Red light: Alerts that the filter's capacity is exhausted and immediate replacement is required. 

An additional sound indication complements this system: one short beep indicates the capacity is running out, and two short beeps signal that replacement is necessary. 

Indication of purified water quality 

The smart color indicator also monitors and reflects the quality of the purified water. Any deterioration in water quality triggers a warning, ensuring that users are aware when it's time to replace the filters to maintain optimal water purity. 

Smart functions 

  • Membrane auto flushing: To enhance the membrane's lifespan and maintain high purification efficiency, the CROSS90 automatically flushes the membrane at each connection to the network, 5 minutes after each water intake, and after a 12-hour standby period. 
  • Leakage protection: If any leaks are detected inside the filter, the system will automatically shut off the inlet water to prevent any damage or flooding. 
  • Not-closed faucet indication: If the faucet is left open for 30 minutes, the filter will emit a sound signal. If the faucet remains open, the system will automatically shut off the inlet water 3 minutes after the buzzer sounds, effectively preventing potential flooding. 

Parameters
 
Flow capacity: 90 L/h
Inlet water pressure: 2-5 bar
Recovery: 55-65 %
TDS (inlet water): 1500 ppm
TDS (purified water): 5-15 ppm
Electrical requirement: 230 V, 50 Hz
 

Weight & measurements


Dimensions, H×W×D: 615 × 248 × 530 mm
Filter weight: 11 kg



Specification


System components
 
  • Filter housing
  • Set of replacement filters
  • Smart faucet for purified water
  • 3-way connector
  • Drain saddle
  • Pack of tubes
  • Detachable power supply
  • User manual

High performance filtration

  • Composite polypropylene sediment and carbon block filter – removes sediment and rust particles, reduces content of chlorine, chlorination byproducts, natural organic matter, and petrochemicals. Replacement: once every 6 months.
  • 600 GPD RO membrane element – purifies water from 99.8% of impurities including bacteria, viruses, and unpleasant tastes or odors. Replacement: once every 24 months.
  • Chlorine taste and odor (CTO) filter – improves the taste and odor of purified water. Replacement: once every 12 months.

Smart indication

INDICATION OF REPLACEMENT FILTERS CONDITION

  • A color indication on the purified water faucet and the front panel of the filter reminds of the need to change the replacement filters.
  • Additional sound indication (1 short signal - the capacity is running out, 2 short signals - replacement is required).

INDICATION OF PURIFIED WATER QUALITY

  • The color indication on the front panel of the filter warns about the deterioration of water quality and the need to change the replacement filters.

Smart functions

  • Membrane auto flushing: The filter activates flushing of the membrane element at each connection to the network, 5 minutes after each water intake, and after each 12-hour standby.

    Increased membrane service life and purifying efficiency

  • Leakage protection: The filter automatically shuts off the inlet water if any leaks are detected inside the filter.
  • Not-closed faucet indication: The filter notifies you with a sound signal after 30 minutes if you forget to close the faucet. It automatically shuts off the inlet water 3 minutes after the buzzer sounds to prevent flooding.

Technical characteristics

  • Inlet pressure: 2-5 bar
  • Inlet water temperature: +5...+30°C
  • Capacity: 1.5 L/min
  • Power supply: 230 V, 50 Hz
  • System weight: 11 kg
  • Permissible ambient temperature: +5...+40°C
  • External connection to water supply: ½″ inch
  • Overall dimensions (H x W x D): 435 x 140 x 458 mm
  • Power consumption: 120 W

Source water requirements

  • pH: 6.5–8.5
  • Total dissolved solids: ≤ 1500 ppm
  • Hardness: <500 ppm CaCO₃
  • Chlorine: ≤ 0.5 ppm
  • Total iron: ≤ 0.3 ppm
  • Manganese: ≤ 0.1 ppm
  • Chemical oxygen demand: ≤ 5 ppm O₂
  • Total microbial count (TMC): ≤ 50 CFU/100 ml
  • Coliform index: ≤ 3

Service

To maintain optimal performance, the CROSS 90 water filter requires periodic replacement of its filtration elements.

Cartridge replacement frequency

Easy and Dry Cartridge Replacement

Replacing the cartridges is quick and straightforward, requiring only two simple steps. When you twist the cartridge to remove it, the inlet water flow automatically shuts off, ensuring a clean and dry replacement process.

A color-coded indicator on both the purified water faucet and the filter's front panel will alert you when it’s time to replace the cartridges. Additionally, a sound indication system provides extra alerts: one short beep signals that the filter's capacity is nearing exhaustion, and two short beeps indicate that a replacement is needed.

Easy and dry cartridge replacement


High-performance filtration

CROSS 90 uses three replaceable cartridges: composite PP sediment and carbon block filter that removes sediment, chlorine, and organics

 

Membrane auto flushing

The smart functions feature automatically flushes the membrane element, enhancing its lifespan and purification efficiency. Flushing occurs each time the filter connects to the network, 5 minutes after every water intake, and after every 12-hour standby period. This ensures consistent performance and prolonged membrane life.

   
Leakage protection

Leakage protection feature automatically shuts off the inlet water if a leak is detected inside the filter, preventing              potential damage.



 

Smart indication

The system alerts you when it’s time to replace filters, with color signals on the faucet and front panel. A beep warns when filter capacity is low or replacement is needed. It also monitors water quality, notifying you if it deteriorates.




 

Compact dimensions

The slim and compact design of this product saves valuable space under your sink, fitting neatly in tight areas. Ideal for kitchens with limited cabinet space, it helps keep your kitchen clean and organized.
 



 

Real-time monitoring for reliable water quality

The filtration system ensures consistently pure water and features real-time monitoring through a smart faucet indicator. This allows you to easily check filter status, providing reassurance of safe and clean water with every use.