Total
CLACK WS RR DM (V1RR-DM)
The five-button reagent control valve Clack WS 1 "RR (V1RR-DM) is the optimal automation for the softener, equipped with a flow meter that allows the filter to be flushed according to the actual water flow rate. Regeneration output can be set in different ways - immediate flow rate, delayed flow rate and according to the timer. It is possible to start manual regeneration (as on each controller of Clack company). Downward and upward regeneration are possible. The valve is located on the filter housing - top, landing thread - 2.5 inches. Water diameter riser (distributor) - 1.05 ". The diameter of the salt line is 3/8 ". The drain line is 3/4" or 1 ". The operating mode is periodic. The Clack WS 1" RR valve (V1RR-DM) is equipped with a modern and reliable RR controller.
Manufacturer: Clack Corporation
Model: Clack WS 1 RR DM
Case Material: Glass Filled Noryl / Noril
Diameter for connection (input / output), inch: 1/1
Diameter of a drainage, inch: 3/4; 1
Diameter of a water pipe, inch: 1.05
Diameter of a landing thread, inch: 2,5 "
Nominal water flow, m3 / h: 6.1 (27 gpm-102 l / min, with a differential of 27 psi)
Regeneration Type: Downstream / Upstream
Controller: Electronic, up to 6 stages of regeneration
Type of memory: Non-volatile (EEROM, electrically erasable read-only programmable memory)
Reagent resistance: Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Housing height from the top of the filter housing, mm: 187
Range of the applied cases, inch: 6-21 - softening
6-14 - filtering
Power supply characteristics, V / Hz: 220/50
Operating temperature, degrees Celsius: 4-43
Working pressure, bar: 1.4-8.27
Reagent tank filling rate: 0.5 gpm (1.9 L / min)
Weight of pilot valve, kg: 4.5 lbs (2.0 kg)
The five-button reagent control valve Clack WS 1 "RR (V1RR-DM) is the optimal automation for the softener, equipped with a flow meter that allows the filter to be flushed according to the actual water flow rate. Regeneration output can be set in different ways - immediate flow rate, delayed flow rate and according to the timer. It is possible to start manual regeneration (as on each controller of Clack company). Downward and upward regeneration are possible. The valve is located on the filter housing - top, landing thread - 2.5 inches. Water diameter riser (distributor) - 1.05 ". The diameter of the salt line is 3/8 ". The drain line is 3/4" or 1 ". The operating mode is periodic. The Clack WS 1" RR valve (V1RR-DM) is equipped with a modern and reliable RR controller.
Manufacturer: Clack Corporation
Model: Clack WS 1 RR DM
Case Material: Glass Filled Noryl / Noril
Diameter for connection (input / output), inch: 1/1
Diameter of a drainage, inch: 3/4; 1
Diameter of a water pipe, inch: 1.05
Diameter of a landing thread, inch: 2,5 "
Nominal water flow, m3 / h: 6.1 (27 gpm-102 l / min, with a differential of 27 psi)
Regeneration Type: Downstream / Upstream
Controller: Electronic, up to 6 stages of regeneration
Type of memory: Non-volatile (EEROM, electrically erasable read-only programmable memory)
Reagent resistance: Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Housing height from the top of the filter housing, mm: 187
Range of the applied cases, inch: 6-21 - softening
6-14 - filtering
Power supply characteristics, V / Hz: 220/50
Operating temperature, degrees Celsius: 4-43
Working pressure, bar: 1.4-8.27
Reagent tank filling rate: 0.5 gpm (1.9 L / min)
Weight of pilot valve, kg: 4.5 lbs (2.0 kg)
