Control valve CLACK WS 2H (V2H-BTZ)

2850.00 €
Compare products
The Clack WS 2H reagentless control valve (V2H-BTZ) is an automatic system for a high-performance three-cycle filter, which is flushed only with backwash. Exit to regeneration - by timer. It is possible to start manual regeneration (as with every controller from Clack). Valve seating on the filter housing - top / side. The diameter of the water pipe (distributor) is 63 mm. The diameter of the salt line is not provided. The drainage line is 2 ". The operating mode is periodic.

Manufacturer: Clack Corporation
Model: Clack WS 2H BTZ
Body Material: Lead Free Brass / Bronze
Diameter for connection (input / output), inch: 2 ”Female BSPT or NPT / 2.5” Groove Lock
Drain Diameter, inch: 2 ”Female NPT or BSPT 2.5” Groove Lock
Diameter of the riser, inch: 63mm O.D. or 2.375 ”O.D. Pipe
Diameter of a landing thread, inch: Quick Disconnect, 4 ”- 8 UN, 6” Flange, Side Mount
Nominal water flow, m3 / h: 473 lpm, 28.4 m3 / h
Regeneration Type: Upstream
Controller: Electronic (up to 9 stages of regeneration)
Type of memory: Non-volatile (EEROM, electrically erasable read-only programmable memory)
Reagent Resistance: Sodium Chloride, Potassium Chloride, Potassium Permanganate, Sodium Bisulfite, Chloramines
Housing height from the top of the filter housing, mm: with 4 ”- 8 UN QC Base is 292mm
with 6 ”Flange QC Base is 294.6mm
Range of the applied cases, inch: 18 - 63 - softening / 18 - 48 - filtration
Power supply characteristics, V / Hz: 220/50
Operating temperature, degrees Celsius: 4 - 43
Working pressure, bar: 1.4 - 8.27
Weight of control valve, kg: 22.7 Kg