Control valve CLACK WS 3 (V3-BTZ)

3350.00 €
Compare products
CLACK WS3 (V3-BTZ)

Clack WS3 reagentless control valve (V3-BTZ) is an automatic device for a high-performance three-cycle filter, which is flushed only with backwash. Exit to regeneration - by timer. It is possible to start manual regeneration (as with every controller from Clack). The location of the valve on the filter housing is top / side. The size of the water pipe (distributor) is 3 ". The size of the salt line is not provided. The drain line is 3". The operating mode is periodic.

Manufacturer: Clack Corporation
Model: Clack WS 3 BTZ
Body Material: Lead Free Brass / Bronze
Diameter for connection (input / output), inch: 3 ”Female BSPT or NPT
Drain Diameter, inch: 3 ”Female NPT or BSPT
Diameter of the riser, inch: 90mm or 3.5 ”O.D. Pipe 3 ”NPS
Bore Diameter, inch: Quick Disconnect, 6 ”Flange, Side Mount
Nominal water flow, m3 / h: 946 lpm, 56.8 m3 / h
Regeneration Type: Upstream
Controller: Electronic (up to 9 stages of regeneration)
Type of memory: Non-volatile (EEROM, electrically erasable read-only programmable memory)
Reagent Resistance: Sodium Chloride, Potassium Chloride, Potassium Permanganate, Sodium Bisulfite, Chloramines
Housing height from the top of the filter housing, mm: with 6 ”Flange QC Base is 318mm
Range of the applied cases, inch: 18 - 96 - softening / 18 - 63 - filtration
Power supply characteristics, V / Hz: 220/50
Operating temperature, degrees Celsius: 4 - 43
Working pressure, bar: 1.4 - 8.27
Weight of control valve, kg: 25.9