Control valve Clack WS 2H (V2H-DM)

2859.99 €
Compare products
Clack control valve WS 2H high performance valve. New line of Clack Corporation. The valve is used in softening / filtration plants. The valve is equipped with a V3242-01 BOARD controller. It has a remote control panel, which makes it convenient to configure and diagnose the valve. It is possible to program all stages of regeneration. The valve is made of bronze. The diameter for the connection is 2 ". The valve fit is top / side. The diameter of the thread is 4". The diameter of the water pipe (distributor) is 63 mm.

Manufacturer: Clack Corporation
Model: Clack WS 2H
Body Material: Lead Free Brass / Bronze
Diameter for connection (input / output), inch: 2 ”Female BSPT or NPT / 2.5” Groove Lock
Drain Diameter, inch: 2 ”Female NPT or BSPT 2.5” Groove Lock
Diameter of the riser, inch: 63mm O.D. or 2.375 ”O.D. Pipe
Diameter of a landing thread, inch: Quick Disconnect, 4 ”- 8 UN, 6” Flange, Side Mount
Nominal water flow, m3 / h: 473 lpm, 28.4 m3 / h
Regeneration Type: Upstream
Controller: Electronic (up to 9 stages of regeneration)
Type of memory: Non-volatile (EEROM, electrically erasable read-only programmable memory)
Reagent Resistance: Sodium Chloride, Potassium Chloride, Potassium Permanganate, Sodium Bisulfite, Chloramines
Housing height from the top of the filter housing, mm: with 4 ”- 8 UN QC Base is 292mm
with 6 ”Flange QC Base is 294.6mm
Range of the applied cases, inch: 18 - 63 - softening /
18 - 48 - filtering
Power supply characteristics, V / Hz: 220/50
Operating temperature, degrees Celsius: 4-43
Working pressure, bar: 1.4 - 8.27
Weight of control valve, kg: 22.7 Kg