Control valve Runxin F63C1 (Down flow) 4,5m3/h

The automatic control valve with a flow meter Runxin F63C1 is designed to control the operation of household and commercial water filters, separately and as part of the cleaning and water treatment equipment complexes.
It is used in water softening systems.
Description ...

130.00 €

Compare products

The Runxin F63C1 control valve is a one-piece body with a front panel, on which is located an LCD display and 4 buttons, with the help of which the valve is controlled and adjusted. There are two outlets for the source and purified water in the valve, a drainage line, a feeder line, as well as an external 2 1/2 "thread for installation on filter housings from 6" to 18 ". The maximum flow rate of water in the valve is 4.5 m3 /hour.
A timer is built into the valve control unit, due to which after a certain time, set in advance, it switches to the regeneration mode. This procedure is necessary to restore the filtering properties of the filler, which are lost in the process of softening. The frequency of the regeneration procedure depends on the characteristics of the water and the filler.

Runxin F63C1 features:

Disc valve design;
Indication of a long power outage, the entered parameters are stored for 3 days;
During flushing the filter output is closed;
Connector for an external managed device;
Input Control Connector;
Button lock;
Regeneration time is set both on the specified day and at the specified time;
Water flow control units have four adjustable regeneration start modes: immediate, volume regeneration, deferred regeneration by volume, immediate regeneration with automatic resource calculation, delayed regeneration with automatic resource calculation;
Ability to set backwash not every regeneration cycle;
Water flow control units can regenerate independently of water consumption at a specified interval (0–40 days).