Reverse osmosis system HIDROTEK RO-75G-C01 (with pump and LED)

Hidrotek RO-75G-С01 is a reverse osmosis water purification system with a booster pump. It removes all insoluble harmful substances from the water, providing you and your family with clean, tasty and safe water of the highest quality.
Description ...

189.00 €
Compare products

 Now you can have a complete reverse osmosis system that provides clean water at a good price. The device produces very high-quality water for all food and household needs. A professional osmosi system will produce up to 380 liters of clean water in your kitchen within 24 hours.

- you will feel that you have clean, healthy water in almost unlimited quantities;

- you will save not only money spent on buying water, but also time and health;

- do not pollute the environment with plastic waste;

- you will eat better and healthier food with clean water.

 

WHEN BUYING THIS PRODUCT, YOU CAN CHOOSE INSTALLATION SERVICE AND REPLACEMENT FILTERS AND MEMBRANE.

  The filters already in the system kit will be enough for you for 6-12 months, and membranes with a capacity of up to 150 GPD up to 24-36 months (higher-performance membranes can serve longer). The service life of filters and membranes largely depends on the quality of water supplied and the amount of water used.
The moment when the membrane is no longer cleaned of water and needs to be replaced by the simplest TDS meter.
If you buy additional filters or membrane filter sets, you must remember that the filters should be changed every 6-12 months, membrane every 24-36 months.

Specifications

 This set is complete using the best components - without any compromises. The osmosis membrane with a permeability of 100 GDP (up to 380 liters per day) supplies clean and really tasty water for the whole family. Low operating costs are another advantage of this system.
 

TECHNICAL DATA

With pump and TDS meter
NSF certified membrane
Membrane permeability: 100 GPD
Expansion vessel: 12,11 L metal. Depending on the pressure inside it, the container fills with water from 40 to 65%. The other part is filled with compressed air. The water collection tank can be installed in both vertical and horizontal positions.

Package dimensions: 42*29*56cm
 

FILTERING STAGES

Stage 1 - PP filter for removal of presupply and dirt

Stage 2 - Carbon pellet filter for removing chlorine and other materials

Stage 3 - Carbon block filter

Stage 4 - Reverse osmosis membrane

Stage 5 - Inline carbon filter

 

TDS METER

The meter measures the total concentration of dissolved solids in the solution. The lower the TDS level in water, the more efficiently the body's cells absorb drinking water. The higher the TDS level in water, the greater the likelihood of harmful pollutants in the water that could pose a health risk or make it difficult for water molecules to be absorbed at cellular level.

 

MAINTENANCE OF FILTERS AND DEADLINES FOR CHANGE

For the device to work optimally, it is necessary to constantly maintain it. The frequency of maintenance depends on the quality of the water supplied and the frequency of operation of the system and the amount of water to be filtered. The filter-to-filter deadlines are indicative. Note that the frequency of filter changes may be different, so we recommend that you monitor the TDS changes in the treated water (measured at certain times with the TDS meter). If the TDS level changes significantly - change the filters.