Reverse Osmosis Membrane CSM RE8040-FL

8040-FL CSM Membrane osmosis high-pressure 15 atm. resistant to pollution.
Description ...

1.00 €
Compare products
​Specifications:
Productivity - 1900 GPD, 7200 l / day
Selectivity - 99.70%
The filtering surface area is 7.0 square meters. m
Dimensions - 1016x102 mm
Standard - 4 "

The result of filtering water with a Saehan RE 4040-SHF membrane is complete removal:
  • Metal impurities
  • Chemical compounds in water
  • Viruses and bacteria
  • Microscopic mechanical suspensions
  • Hardness salts and other pollutants
CSM RE 4040-SHF reverse osmosis membrane advantage:
  • High performance and selectivity
  • Modernization for specific water characteristics
  • Resistant to biocontamination and a wide range of acidity pH
  • Economical to use
  • Works well even at low pressure
Work principles:
The action of the membrane is based on a thin-film polyamide material, which has microscopic pores in its structure. Wrapped in a roll, the material is a filter for water, however, it passes only water molecules, since the pore size has a size close to a thousandth of a micron (0.0001 microns). Only water molecules and some low molecular weight gases can leak through these pores. However, water cannot seep through the membrane on its own, so pumps are used that push water through the roll structure of the membrane.
Water moves from the outside to the inside of the roll. Inside the Saehan RE 4040-SHF membrane there is a tube through which purified water (permeate) flows out, and the filtered residue leaves the membrane layers in the form of a concentrate, which is subsequently removed to the sewer.