"Clack" control valve WS1.5 EI Filter - Meter (Backwash only)

Filters for water in the house.
Full automatic with water meter. Kit for softener or complex filter.
Description ...

1299.00 €
Compare products
Clack WS 1,5 "EI control valve - automatic equipment for filters with a diameter of connection 1,5". Diameter under a water pipe - 2 ". Landing carving - 4". It comes in two versions: DM - reagent, BTZ - without reagent. The Clack WS 1.5 "EI (V15EI-DM) reagent valve has a 1/2" reagent line for connecting a salt-solvent tank and is equipped with a meter for purified water. Reagent flow up and down during washing is possible. Reagent-free valve Clack WS 1,5 "EI (V15EI-BTZ) is a three-stroke valve (default) and is used for separators, clarifiers, and collection filters. This valve is equipped with a five-button (degree) CI card with maximum. You can immediately rinse by switching to the next regeneration stage The plate has connectors for meters, MAV and NHWB valves, as well as relay outputs.

Manufacturer: Clack Corporation
Model: Clack WS 1.5 EI
Body Material: Brass / Bronze
Connection diameter (input / output), inches: 1.5 / 1.5, internal NPT
Sewer diameter, inches: 1.25 ”NPT, 3/4” standard NPT, 1 ”NPT, optional
Water Pipe Diameter: 1.90 ”Outer Pipe, 1.5” NPS
Diameter of a landing thread, inches: 4 "
Nominal water consumption, m3 / h: 15.8 (70 gallons per minute - 263 l / min)
Regeneration Type: Descending / Ascending
Controller: EI (electronic, up to 6 stages of regeneration)
Type of memory: non-volatile (EEROM, electronic erasable read-only memory)
Reagent stability: sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Housing height from the top of the filter housing, mm: 191
Range of applied covers, inches: 12-30 - Softening
12-30 - filtration
Characteristics of the power supply, V / Hz: 220/50
Operating temperature, degrees Celsius: 4-43
Working pressure, bar: 1.4 - 8.27
Weight of control valve, kg: 9.3 kg