"Clack" control valve WS1.25 TC Regenerating (Softener KMnO)


Description ...

309.00 €
Compare products
Clack control valve WS 1.25 "TC - automatic equipment for filters with a connection diameter of 1", 1.25 ". Diameter for a water pipe - 32 mm. Fittings - 2.5". It is delivered in two modifications: DT - reagent and BTZ - reagent-free. Reagent valve Clack WS 1.25 "TC (V125TC-DT) has a reagent line 3/8" or 1/2 "for connecting a salt tank, a meter-flow meter is not provided. Only a downward flow of reagent is possible during flushing. Clack WS reagent-free valve 1.25 "TC (V125TC-BTZ) is a three-cycle (default), and is used on iron removers, clarifiers, and in-line filters. This valve is equipped with a three-button TC card. A direct change in the duration of the stages is not possible. The duration of the washing stages is included in the programs recorded in the controller. There is a function to start immediate flushing, with the transition to the next stage of regeneration. MAV and NHWB Connectors - Not Provided.

Manufacturer: Clack Corporation
Model: Clack WS 1.25 TC
Case Material: Glass Filled Noryl / Noril
Diameter for connection, inch: 1 or 1.25
Drain Diameter, inch: 3/4 or 1
Diameter of a water pipe, inch: 1.25
Diameter of a landing thread, inch: 2,5 "
Nominal consumption of water, m3 / h: 7.74
Regeneration Type: Downstream
Controller: TC (Electronic, up to 5 stages of regeneration)
Type of memory: Non-volatile (EEROM, electrically erasable read-only programmable memory)
Reagent resistance: Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Housing height from the top of the filter housing, mm: 187
Range of the applied cases, inch: 6-21 - softening
6-21 - filtering
Power supply characteristics, V / Hz: 220/50
Operating temperature, degrees Celsius: 4-43
Working pressure, bar: 1.4-8.27
Reagent tank filling rate: 0.5 gpm (1.9 L / min)
Weight of pilot valve, kg: 4.5 lbs (2.0 kg)