"Clack" control valve WS1.25 EI Regenerating - Meter (Softener KMnO)

359.00 €
Compare products
Clack WS control valve 1.25 "EI - automatic equipment for filters with a connection diameter of 1", 1.25 ". Diameter for a water pipe - 32 mm. Fittings - 2.5". It is delivered in two modifications: DM - reagent and BTZ - reagent-free. Reagent valve Clack WS 1.25 "EI (V125EI-DM) has a reagent line 3/8" (1/2 ") for connecting a salt-solvent tank, and is equipped with a meter to account for purified water. Upstream and downstream reagent flow during flushing is possible. Reagent-free valve Clack WS 1.25 "EI (V125EI-BTZ) is a three-cycle (by default), and is used on deferrizers, clarifiers, and filter collectors. This valve is equipped with a four-button EI board. It is possible to carry out immediate flushing, with the transition to the next stage of regeneration. The board has connectors for connecting the meter, MAV and NHWB valves.

Manufacturer: Clack Corporation
Model: Clack WS 1.25 EI
Case Material: Glass Filled Noryl / Noril
Diameter for connection (input / output), inch: 1/1; 1.25 / 1.25
Diameter of a drainage, inch: 3/4; one
Diameter of a water pipe, inch: 1.25
Diameter of a landing thread, inch: 2,5 "
Nominal consumption of water, m3 / h: 7.74
Regeneration Type: Downstream / Upstream
Controller: EI (Electronic, up to 6 stages of regeneration)
Type of memory: Non-volatile (EEROM, electrically erasable read-only programmable memory)
Reagent resistance: Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Housing height from the top of the filter housing, mm: 187
Range of the applied cases, inch: 6-21 - softening
6-21 - filtering
Power supply characteristics, V / Hz: 220/50
Operating temperature, degrees Celsius: 4-43
Working pressure, bar: 1.4-8.27
Reagent tank filling rate: 0.5 gpm (1.9 L / min)
Weight of pilot valve, kg: 4.5 lbs (2.0 kg)