ECOSOFT PP string wound sediment replacement filter 2.5"×10" 20-micron

2.50 €
Compare products

ABOUT CARTRIDGE
Ecosoft 2.5 "x10" 20 micron cartridge made of polypropylene filament is suitable for cleaning water from rust, sand, silt.
Provides protection of plumbing and pipelines from damage.

MAIN ADVANTAGES
Resource 10,000 liters
High cleaning efficiency
Stable winding density characteristics
Quality thread from a Ukrainian manufacturer

WHAT CHANGES WILL HAPPEN AFTER THE PURCHASE OF THE FILTER?
You will enjoy taking a shower or bath in clear and transparent water.
The shower head nozzles will not clog and will delight you with a good pressure.
Your heating and plumbing systems will last you longer.
The cartridges in the drinking water filter in the kitchen can be changed less frequently.

HOW THE FILTER WORKS
The cartridge is made of strong polypropylene filament, which is wound around a rigid polypropylene core.
During cleaning, the thread retains mechanical impurities, and clean water is supplied to the consumer.

SERVICE
The cartridge is only suitable for cold water purification.
If the water contains microbiological contamination, it is necessary to put a disinfection stage before or after the filter with a polypropylene cartridge.
The resource of the cartridge depends on the quality of the source water.
Do not exceed the recommended filtration rate, this may lead to a deterioration in the quality of water purification.
To obtain clean water, the replaceable cartridge must be replaced at least once every 6 months.

SPECIFICATIONS
Cartridge type: for mechanical filters
Material: PP fiber filament
Size: 2.5 "× 10"
Filtration rating, micron: 20
Water temperature, ° C: +3 ... + 60
Height, mm: 250 ± 1.0
Outer diameter, mm: 60 ± 1.0
Recommended filtration rate, l / min: 8