Total
CLACK WS RR BTZ (V1RR-BTZ)
The five-button reagent-free Clack WS 1 "RR control valve (V1RR-BTZ) is the optimal automation for a three-cycle filter, which is flushed only with backwash. Regeneration output is on a timer. It is possible to start manual regeneration (as with every Clack controller). Location valves on the filter housing - top, landing thread - 2.5 inches. The size of the water pipe (distributor) - 1.05 ". The size of the salt line is not provided. Drain line - 3/4 "or 1". The operating mode is periodic. The Clack WS 1 "RR valve (V1RR-BTZ) is equipped with a modern and reliable RR controller.
Manufacturer: Clack Corporation
Model: Clack WS 1 RR
Case Material: Glass Filled Noryl / Noril
Diameter for connection (input / output), inch: 1/1
Diameter of a drainage, inch: 3/4; 1
Diameter of a water pipe, inch: 1.05
Diameter of a landing thread, inch: 2,5 "
Nominal water flow, m3 / h: 6.1 (27 gpm-102 l / min, with a differential of 27 psi)
Regeneration Type: Downstream / Upstream
Controller: Electronic, up to 6 stages of regeneration
Type of memory: Non-volatile (EEROM, electrically erasable read-only programmable memory)
Reagent resistance: Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Housing height from the top of the filter housing, mm: 187
Range of the applied cases, inch: 6-21 - softening
6-14 - filtering
Power supply characteristics, V / Hz: 220/50
Operating temperature, degrees Celsius: 4-43
Working pressure, bar: 1.4-8.27
Reagent tank filling rate: 0.5 gpm (1.9 L / min)
Weight of pilot valve, kg: 4.5 lbs (2.0 kg)
The five-button reagent-free Clack WS 1 "RR control valve (V1RR-BTZ) is the optimal automation for a three-cycle filter, which is flushed only with backwash. Regeneration output is on a timer. It is possible to start manual regeneration (as with every Clack controller). Location valves on the filter housing - top, landing thread - 2.5 inches. The size of the water pipe (distributor) - 1.05 ". The size of the salt line is not provided. Drain line - 3/4 "or 1". The operating mode is periodic. The Clack WS 1 "RR valve (V1RR-BTZ) is equipped with a modern and reliable RR controller.
Manufacturer: Clack Corporation
Model: Clack WS 1 RR
Case Material: Glass Filled Noryl / Noril
Diameter for connection (input / output), inch: 1/1
Diameter of a drainage, inch: 3/4; 1
Diameter of a water pipe, inch: 1.05
Diameter of a landing thread, inch: 2,5 "
Nominal water flow, m3 / h: 6.1 (27 gpm-102 l / min, with a differential of 27 psi)
Regeneration Type: Downstream / Upstream
Controller: Electronic, up to 6 stages of regeneration
Type of memory: Non-volatile (EEROM, electrically erasable read-only programmable memory)
Reagent resistance: Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, sodium hydroxide, hydrochloric acid and chloramines
Housing height from the top of the filter housing, mm: 187
Range of the applied cases, inch: 6-21 - softening
6-14 - filtering
Power supply characteristics, V / Hz: 220/50
Operating temperature, degrees Celsius: 4-43
Working pressure, bar: 1.4-8.27
Reagent tank filling rate: 0.5 gpm (1.9 L / min)
Weight of pilot valve, kg: 4.5 lbs (2.0 kg)
